Solar irrigation and solar off grid home systems

  In order to resist natural disasters, it is necessary to control the location, design and installation of photovoltaic power stations. After the completion of the construction of the power station, how to effectively prevent natural disasters, the role played by the later operation and maintenance can not be underestimated, the above steps can be described as interlocking and indispensable. Therefore, in the storm-prone area, the following four points should be done to build a distributed photovoltaic power station: I. Site selection: ensuring the quality of the building Any building must be designed with safety in mind. In the past, building materials were often heavy, and the design was mainly based on support capacity and prevention of earthquake risks. In recent years, with the advent of lightweight materials, the risk of these building materials being blown away by the wind is also considered in design, preventing the roof from being torn by the airflow. At present, household di

  HQ Mount introduces the new   BR4 ballasted flat roof mounting system , designed to help installers mount solar modules faster and easier.  Installers of PV solar modules can spend hours aligning mounting racks in perfect rows. Now they can do the same job in a fraction of the time at a fraction of the cost with none of the discomfort, thanks to the new BR4 Ballasted Flat-Roof Mounting System. From HQ Mount, an early pioneer of solar mounting systems, BR4 is one of the simplest flat-roof systems to assemble. It has only a few components, which makes it easier to transport and quicker to set up. The smarter design also makes BR4 cost less than other top-quality, flat-roof racking systems. Install  BR4  in four simple steps 1. Layout frame on the roof. Use spanners and jigs to align them. 2. Place cement blocks in ballast pans. 3. Lay down solar modules. 4. Secure modules with clamps, tightening the bolt outside each frame. What’s better about  BR4 ? §  Lower cost.  Because of the smar

1. Will the panels reflect light and affect the neighbors? The photovoltaic modules are basically made of coated glass, with a transmittance of more than 93%. Most of the light sources will be absorbed, which will not cause light pollution and affect the neighbors. 2. Will the modules get electric shock after thunder? No, the photovoltaic system has lightning protection and grounding measures. 3. Is it necessary to disconnect the photovoltaic power generation system in thunderstorm weather? Distributed photovoltaic power systems are equipped with lightning protection devices, so it is not necessary to disconnect them. For the sake of safety, it is suggested to disconnect the circuit breaker switch of the combiner box and cut off the circuit connection with the photovoltaic module, so as to avoid the direct lightning stroke which cannot be removed by the lightning protection module. 4. Will the panel generate radiation? Photovoltaic power generation system is based on the principle of

With the improvement of living standard, more and more people choose to buy their own car. At the same time, people are turning to electricity car(like Tesla) to reduce carbon emission. Due to above two reason, a problem has emerge: where to recharge your car and where to park it? CORIGY SOLAR as an professional manufacturer of solar mounting system will give you our answer. The answer is solar carport which combines solar panels with ground mount solar racking systems. Solar carport as one of important solar panel mount, CORIGY SOLAR attached great importance to it. Solar carport has below advantages: 1. Beautiful appearance: Solar panel mounting bracket replace the membrane structure steel roof of the traditional carport. The blue photovoltaic panels shining under the sun, becoming a beautiful scenery. 2. Strong practicality: Not only can it prevent the car from being exposed to the sun and rain, but it can also provide a steady stream of green power for charging. You can also add w